1. What is a SMC FRP ventilation exhaust Fan?

Although the ventilation fans can be constructed from a variety of materials to meet a variety of applications. When it comes to corrosive applications there are a few options available but a common solution is fiberglass.

Fiberglass ventilation fans is SMC produced by composite material made of a polymer matrix reinforced with glass fibers. It is best suited to exhaust airborne corrosive gasses and mists that are prevalent in some applications with a wide variety of chemicals. Corrosive gasses and mists in noxious environments cause premature wear on ventilation equipment and use of Marshine FRP ventilation equipment provides a safe solution that will operate for a long time.

2.What are the components of an SMC FRP ventilation exhaust fan?

Fan Frame Shell:
The Marshine fan shell made of glass fiber reinforced plastic (FRP) is different from the ordinary fan. Its shell and impeller are made of glass fiber reinforced plastic. Its biggest characteristic is corrosion resistance and acid and alkali resistance.
Louver or shutter:
PVC shutter: Using the air downstream principle, this shutter is light weight and exhibits antioxidant properties, is light weight and is resistant to distortion. it can open and close swiftly which prevents backflow of air.
Fan Blades:
Adopt glass fiber reinforced plastic fan blade, no dust, special blade shape
Ensure large air volume, no deformation, no fracture
Pure copper wire motor.
The motor adopts the national standard pure copper motor, fast speed,
large power, has loss power protection device, protection class IP55, insulation class F
Thicken Stents:
high-strength ,low noise, durable.
High-quality goods bearing.
Imported Bearing :
Good speed, low noise, not easy to rust High hardness, not easy to wear

3. What are the standard size of SMC FRP ventilation exhaust fan?

Model MS-680, MS-850, MS-1060, MS-1260,MS-1460

4.What is a good SMC FRP ventilation exhaust fan?

1. FRP ventilation fan produced with corrosion resistant materials that are designed to withstand the most severe production environments.
2. After production fans are tested & balanced to ensure reliability in highest temperatures, the highest pressures and the widest variety of contaminants of all of the options.
3. Fans Motor and blade match to deliver consistent, dependable air flow with a wide range of static pressure ratings.
4. Marshine FRP ventilation fan are available in both belt and direct drive. Each style is suitable for various corrosive applications. Fans are ABS & AMCA certified.
5. Each part adopts smooth excessive, smooth appearance, no cracks, gaps, burrs and other defects, the overall effect is good, the fan has reasonable aerodynamics, large air volume, low noise, high efficiency and corrosion resistance.
6. Widely used in hotels, restaurants, theaters, office buildings, laboratories, factories, livestock farms residential ventilation and other places.

5.What is the SMC FRP ventilation exhaust fan use cautions?

1. Before use Marshine ventilation fan please check whether the installation foundation is good, whether the motor wiring is correct, whether the electrical system meets the specifications, and ensure the normal operation of the fan.
2.If the fan is started, pay attention to the fan components
3.Clean the dust, dirt and other impurities inside the fan regularly to prevent rust.
4. If the ventilation fan have big noisy, the negative pressure blower motor bearing is not good, the axial fan base screw is loose, the blades are not fixed on the shaft.
5. When the fan is faulty, non-professional personnel shall not disassemble the fan to avoid danger and before the fan repairing or disassembled, the power must be cut off to prevent accidents.
6. In addition to the equipment, it is necessary to accurately calculate the total volume and area of the plant, the wind speed per second in the factory, and the ventilation frequency per hour of the whole plant.